Allied Telesis FORMULA 8200 - Manual (Page 100)

Command Reference
5-22
Table 5-6 describes the parameters shown in the ETHERNET/
SHOW/COUNT display.
Table 5-6 ETHERNET/SHOW/COUNT Parameters
Parameter Description
TX bytes
The number of transmitted bytes since the last time Ethernet statistics were
enabled or cleared
Tx frames
UniCast The number of unicast frames transmitted from one network device to
another single network device
MultiCast The number of multicast frames transmitted from one network device to
multiple network devices
BroadCast The number of broadcast frames transmitted to all network devices
TX errors
Fcs The number of frames that were discarded on the transmit side because of
FCS (Frame Check Sequence) error
txUndrErrs The number of frames that were discarded on the transmit side because of
underrun
ExcessColl The number of frames that were dropped because of excessive collisions
OneColl The number of frames that were transmitted after exactly one collision
multiColl The number of frames that were transmitted after more than one collision
Rx bytes The number of received bytes since the last time Ethernet statistics were
enabled or cleared
RX
frames
UniCast The number of received unicast frames
MultiCast The number of received multicast frames
BroadCast The number of received broadcast frames
rx64 The number of frames (including frames with errors) that were 64 bytes in
length
rx65to127 The number of frames (including frames with errors) that were between 65
and 127 bytes long
rx128to255 The number of frames (including frames with errors) that were between
127 and 255 bytes long
rx256to511 The number of frames (including frames with errors) that were between
256 and 511 bytes long
rx512to1023 The number of frames (including frames with errors) that were between
512 and 1023 bytes long
rx1024to1518 The number of frames (including frames with errors) that were between
1024 and 1518 bytes long