Allied Telesis FORMULA 8200 - Manual (Page 155)

FORMULA 8200 User’s Guide
C-9
Restoring Your
Configurations To restore your configurations:
1. Log in to the switch and PING the TFTP server to verify
communications:
2. Assign an IP address to the TFTP server:
3. Restore the configuration files by using the TFTP/DOWNLOAD//
CFG command. In this command, you need to specify the name of
the file(s) you want to restore:
4. Reboot the switch using the REBOOT command on the console
prompt:
You are done.
/>ping 192.48.127.124
192.48.127.124 is alive
/TFTP/SERVER
IP address of the tftp server () : 192.48.127.124
Save TFTP configuration to flash? (y/n) Y
Writing new TFTP configuration to flash ...
Updating system/VLAN configuration....
/>TFTP/DOWNLOAD/CFG
Name of file on switch (system.cur) :
Name of file on tftp server (system.001) :
File “system.001” on server (192.48.12.124) is to be copied to switch as “/flash/
system.cur”
Are they correct? (y/n) y
Save TFTP configuration to flash? (y/n) y
Writing new TFTP configuration to flash ...Updating system/VLAN configuration....
LF = /flash/system.cur, RF = system.001, SRV = 192.48.127.124, op = get
/TFTP/DOWNLOAD>
/TFTP/DOWNLOAD>TOP
/ >REBOOT
Are you sure, you want to reboot ? [y/n]: y