beautypg.com

Boot/ip/config example, Enter the following command, Enter the information after each prompt, or pre – Allied Telesis FORMULA 8200 User Manual

Page 89: Boot/update/system example

background image

FORMULA 8200 User’s Guide

5-11

BOOT/IP/CONFIG Example

To assign a new IP address:

1. Enter the following command:

BOOT/IP/CONFIG

2. Enter the information after each prompt, or press [Enter] to keep

the default.

The following screen is an example of the prompts:

BOOT/UPDATE/SYSTEM Example

To update the system and VLAN configuration to flash:

Enter the following command:

BOOT/UPDATE/SYSTEM

The following display appears:

/BOOT >ip/config

Local IP configuration:

IP address (137.168.24.190) :149.35.101.31

Local host name () :

Default gateway (0.0.0.0) :

Net mask (255.255.255.0) :

OK to write config to flash (y/n) ?

/BOOT/IP >

/BOOT/UPDATE >system

Updating system/VLAN configuration....

/BOOT/UPDATE >

See also other documents in the category Allied Telesis Computer hardware: