Allied Telesis FORMULA 8200 - Manual (Page 113)

FORMULA 8200 User’s Guide
5-35
SNMP Command
Syntax
SNMP/CONFIG
SNMP/SHOW/
Menu
Description
The SNMP command allows you to configure and display
information about SNMP parameters. Table 5-11 describes the
parameters in the display.
/ snmp
== SNMP MENU ==
CONFIG [SHOW]
Table 5-11 SNMP Command Parameters
Subcommand Alias Description
CONFIG snmpcfg Configures the SNMP agent parameters.
SHOW PARAM vsnmpp Displays information about SNMP system
description and location.
READCOMM vread Displays the read community string.
WRITECOMM vwrite Displays the write community string.