Allied Telesis FORMULA 8200 - Manual (Page 122)

Command Reference
5-44
VBRIDGE/CONFIG/BRIDGE Example
To configure a virtual bridge:
1. Use the VBRIDGE/CONFIG/BRIDGE command. For example, to
modify VLAN 1, enter the following command:
VBRIDGE/CONFIG/bridge 1
The following display appears:
2. Respond to the prompt by entering the item number with an
equal sign (=) and the value.
For example, to change the aging time to 310:
To turn Spanning Tree off:
Respond to the prompt by entering the item number with an
equal sign (=) and the value, as follows:
To save changes and exit the menu:
Enter 0 at the prompt, as follows:
/VBRIDGE/CONFIG/BRIDGE 1
Spanning Tree Parameters Modification for VLAN 1:
1) Spanning tree Status is ON for this VLAN, set to OFF? (y/n)
2) New Priority (0..65535) (current value is 32768):
3) New Bridge Hello Time (1..10 secs) (current value is 2):
4) New Bridge Max Age (6..40 secs) (current value is 20):
5) New Bridge Forward Delay (4..30 secs)(current value is 15):
6) New Aging Time (10..1000000 secs) (current value is 300):
Enter selection (modification or 0 to commit, c to cancel) >
Enter selection (modification or 0 to commit, c to cancel) > 6=310
Enter selection (modification or 0 to commit, c to cancel) > 1=y
Enter selection (modification or 0 to commit, c to cancel) > 0