Allied Telesis FORMULA 8200 - Manual (Page 54)

Operating and Managing the FORMULA 8200 Switch
4-8
Displaying Ethernet Port Statistics Information
When enabled, you can display port statistics, such as transmit and
receive frames and errors.
Note
Before using this command, ensure that statistics are enabled via the
ETHERNET/CONFIG/STAT command (previous section).
To display Ethernet port statistics (when enabled):
Use the ETHERNET/SHOW/STAT command to determine if a port has
its statistics gathering function on. Then use ETHERNET/SHOW/
COUNT to display statistical information about a port.
/ETHERNET/SHOW/COUNT 1
PORT#1 RX/TX Statistics
**************************************************
TX bytes: 103488
TX frames:
UniCast: 0 MultiCast: 1617 BroadCast: 0
TX errors:
Fcs: 0 txUndrErrs: 0
ExcessColl: 0 OneColl: 0 multiColl: 0
RX bytes: 0
RX frames:
UniCast: 0 MultiCast: 0 BroadCast: 0
rx64: 0 rx65to127: 0 rx128to255: 0
rx256to511: 0 rx512to1023: 0 rx1024to1518: 0
RX errors:
Fcs: 0 AlignOrErr: 0 rxGoodOverSz: 0
rxErrOverSz: 0 rxGoodUndSz: 0 rxErrUndSz: 0
discBuffFull: 0 discMemFull: 0
Transmit (TX)
port statistics
Receive (RX)
port statistics
CPU/memory
statistics