Allied Telesis FORMULA 8200 - Manual (Page 88)

Command Reference
5-10
BOOT Command
Syntax
BOOT
BOOT/IP
BOOT/SHOW
BOOT/UPDATE/
Menu
Description
The BOOT command displays and defines boot sector information.
Table 5-2 describes the parameters.
/ > boot
== BOOT MENU ==
[IP] SHOW [UPDATE]
Table 5-2 BOOT Command Parameters
Subcommands Alias Description
IP CONFIG ipcfg
Configure IP, gateway, etc. for
system boot.
EEPROM ipprom
Configure EEPROM IP
SHOW vboot
Show boot post-test results.
UPDATE ALL updcfg
Update all configuration from
RAM to flash.
ATM udatm
Update ATM configuration to
flash.
SYSTEM updsys
Update system or VLAN
configuration to flash