beautypg.com

5 preset menu (preset utilities), 6 patrol menu, 7 autopan menu – Videotec ULISSE PLUS User Manual

Page 35

background image

EN - English - I

nstruc

tions manual

33

9.6.6.6 Patrol Menu

01. First Preset: Sets the first preset of the Patrol

sequence.

02. Last Preset: Sets the last preset of the Patrol

sequence.

03. Random Mode: Enables random execution. The

sequence is re-calculated on a continuous basis.

PATROL

------------------------

1>FIRST PRESET : 1

2 LAST PRESET : 250

3 RANDOM MODE : N

Fig. 72

9.6.6.7 Autopan Menu

01. Preset Outward Movement: Sets the initial

position of the Autopan.

02. Preset Return Movement: Sets the final

position of the Autopan.

AUTOPAN

------------------------

1>PRESET OUTWARD: 1

2 PRESET RETURN : 2

Fig. 73

j

The movement speed is specified inside the
Preset ("9.6.6.4 Preset Menu (Edit Preset)",
page 32
).

9.6.6.5 Preset Menu (Preset Utilities)

Once inside the Utilities Configuration menu it is
possible to set the following parameters:
01. Scan Speed: This is the reference speed used

when a preset position is recalled by the Scan
function.

02. Default Speed: Changes the default speed

of the Presets. This value is used based on the
function Set Speed? to assign the same speed
to all Presets .

03. Default Dwell time: Changes the default pause

of the Presets. This value is used based on the
function Set Dwell Time? to assign all Presets
the same pause time.

04. Ramp Value: The Ramp parameter is used

to change start and stop times. The higher
the number, the greater the acceleration/
deceleration during starting/stopping.

05. Set Speed?: To assign all Presets the same

default speed.

06. Set Dwell Time?: To assign all Presets the same

default dwell time.

PRESET UTILITIES

------------------------

1>SCAN SPEED : 20.00

2 DEFAULT SPEED : 10.00

3 DEFAULT DWELL : 3

4 RAMP VALUE : 12

5 SET SPEED?

6 SET DWELL TIME?

Fig. 71