Videotec ULISSE PLUS - Manual (Page 27)

EN - English - I
nstruc
tions manual
25
9.2 How to move around the
menus
Each page of the OSM shows a list of parameters or
sub-menus that can be selected by the operator. To
scroll through the parameters move the cursor by
operating the joystick (up and down).
MANUAL CONTROL
------------------------
1 MAXIMUM SPEED : 20.00
2>VEL. WITH ZOOM : N
3 TILT FACTOR : 2
4 MOVEMENT LIMITS >
Fig. 46
The symbol > at the end of a line indicates the
presence of a specific submenu. To enter the
submenu just confirm the menu item. To exit the
submenu use the Exit funcjtion (Zoom Out).
MANUAL CONTROL
------------------------
1 MAXIMUM SPEED : 20.00
2>VEL. WITH ZOOM : N
3 TILT FACTOR : 2
4 MOVEMENT LIMITS >
Fig. 47
9 Configuration
9.1 On Screen Menu (OSM)
During normal ULISSE operation it is possible to
activate the On Screen Menu in order to set the
advanced functions using the corresponding key/s
(see the handbook for the keyboard you are using).
Exit the On Screen Menu with Zoom Wide (or
Zoom-).
9.1.1 How to use the joystick
All operations in the menus are carried out using the
joystick.
Up
Down
Left Right
Fig. 44 Pan & tilt.
Exit Confirm
Fig. 45 Zoom wide & tele.
j If using a control keyboard with a dual axis
joystick, use the Zoom Wide and Zoom
Tele keys to carry out the Exit and Confirm
commands.