Videotec ULISSE PLUS - Manual (Page 28)

EN - English - I
nstruc
tions manual
26
9.4 How to change the numeric
fields
Move the cursor to the parameter to be changed,
then confirm.
EDIT PRESET
------------------------
1 NR. : 1
2 ENAB.: N
3>PAN : + 0.00
4 TILT : - 40.00
5 SPEED: 20.00
6 PAUSE: 5
7 TEXT : PRESET 001
8 GO TO PRESET?
Fig. 50
The first digit in the numeric field to be changed will
flash and the last line of the display will show the
accepted limits for the field. Move in the field (left
and right) and change the sign or the numeric value
(up and down).
EDIT PRESET
------------------------
1 NR. : 1
2 ENAB.: N
3>PAN : +000.00
4 TILT : - 40.00
5 SPEED: 20.00
6 PAUSE: 5
7 TEXT : PRESET 001
8 GO TO PRESET?
min:-180.00 max:+179.99
Fig. 51
After making the change, confirm. The cursor returns
to the left and the modified figure stops flashing.
The field will be forced to the minimum or maximum
allowed value if you try to insert a value outside the
limits.
9.3 How to change the settings
Move the cursor to the parameter to be changed and
confirm. The field will start flashing, indicating that
it is in change mode. Operating the joystick (up and
down) will show the alternative choices.
MANUAL CONTROL
------------------------
1 MAXIMUM SPEED : 20.00
2>VEL. WITH ZOOM : N
3 TILT FACTOR : 2
4 MOVEMENT LIMITS >
Fig. 48
After identifying the desired selection, confirm.
MANUAL CONTROL
------------------------
1 MAXIMUM SPEED : 20.00
2>VEL. WITH ZOOM : N
3 TILT FACTOR : 2
4 MOVEMENT LIMITS >
Fig. 49
The parameter will stop flashing to confirm the
choice.