Videotec ULISSE PLUS - Manual (Page 34)

EN - English - I
nstruc
tions manual
32
9.6.6.4 Preset Menu (Edit Preset)
Once inside the Edit Preset menu it is possible to set
the following parameters:
01. Number: The Preset number to be edited.
02. Enabling: Enabling preset.
03. Pan: Pan position in degrees.
04. Tilt: Tilt position in degrees.
05. Speed: The speed at which the position is
reached when preset is recalled from the Patrol
and Scan function.
06. Pause: Sets the dwell time in seconds before
starting the next movement in Patrol.
07. Text: The text that is displayed when the preset
position is reached.
08. Go To Preset: Obliges the Pan & Tilt to move to
the selected Preset position.
09. Enable Movements: Allows the Pan & Tilt to
shoot new Preset positions.
EDIT PRESET
------------------------
1>NR. : 1
2 ENAB.: N
3 PAN : + 0.00
4 TILT : - 40.00
5 SPEED: 20.00
6 PAUSE: 5
7 TEXT : PRESET 001
8 GO TO PRESET?
9 ENABLE MOVEMENTS >
Fig. 70
From the menu it is possible to directly store the
preset by sending the Iris Close command that
enables the pan & tilt movements.
9.6.6.2 Manual Control Menu (Limits)
Once inside the Limits menu it is possible to set the
following parameters:
01. Pan Limits: Enables the limits of Pan.
02. Pan Start: Sets the start limit of Pan.
03. Pan End: Sets the end limit of Pan.
04. Tilt Start: Sets the start limit of Tilt.
05. Tilt End: Sets the end limit of Tilt.
LIMITS
------------------------
1>PAN LIMITS : N
2 PAN START : + 0.00
3 PAN END : + 0.00
4 TILT START : + 0.00
5 TILT END : + 0.00
Fig. 68
This is a dynamic self-configuration menu based on
che choice made and displays the parameters on
which it is possibile to operate.
9.6.6.3 Preset Menu
01. Edit Preset: Allows access to Edit Preset menu.
02. Utilities Configuration: Allows access to
Utilities Configuration menu
PRESET
------------------------
1>EDIT PRESET >
2 PRESET UTILITIES >
Fig. 69