Ag Leader EZ-Guide Plus Getting Started Guide - Manual (Page 49)

EZ-Guide Plus Lightbar Guidance System Getting Started Guide Using GPS 47
To configure the system for use with EGNOS:
1. Select GPS / Corrections. The EZ-Guide Plus screen
appears.
2. Select Edit and then press o .
The Edit screen appears.
3. Select Edit EGNOS and then press o .
The EGNOS screen appears.
4. Select the appropriate setting for each satellite. See
the table on page 46.
The default EGNOS settings are:
XP/HP options
If you have a high accuracy smart antenna and are using
XP/HP corrections, you can enable the following options:
• Autoseed™ fast restart technology - enables faster
XP/HP convergence if the vehicle has not moved since
power was turned off
• VBS Backup - enables the use of VBS corrections if
XP/HP corrections are lost
Subscriptions
The OmniSTAR corrections (VBS, HP, and XP) are
subscription services, which are automatically configured.
To view your subscription information, select GPS /
Subscription.
Satellite Default Description
AOR-E Heed Hlth Operational
IOR Off Test signal
IOR-W Heed Hlth Operational
ARTEMIS Off Test signal