Ag Leader EZ-Guide Plus Getting Started Guide User Manual
Page 34
32 Getting Guidance
EZ-Guide Plus Lightbar Guidance System Getting Started Guide
Loading an existing AB Line
1.
Select 9 to reset guidance. The Guidance Pattern
screen appears.
2.
Select Select AB Line and then press
o
. The
Select AB Line screen appears.
3.
Press
u
or
D
to adjust the range of AB Lines to
select from and then press
o
.
The Select Stored AB screen appears. It displays
all saved AB Lines within the range you selected.
The position of the vehicle is shown as a cross with
a dot in the middle. The currently selected AB Line
or curve is displayed with thicker bold lines.
The number of the current line is shown in the
middle of the bottom of the screen. Positions 1–3
are used for headlands and curves. The first straight AB or pivot will be number
4.
4.
Press
u
or
D
to select the correct AB Line and then press
o
. The
Swath/Implement screen appears.
5.
Set the swath width and the implement offset.
6.
Select Exit and then press
o
.
The system loads the line.
Deleting the current AB Line
1.
Select 9. The Guidance Pattern screen appears.
2.
Select Delete Current AB. The Confirmation screen
appears.
3.
Select Continue. The Guidance Pattern screen
appears.
4.
Select a new field pattern to create and then press
o
.
5.
Set the swath width and implement width.
6.
Select Exit and then press
o
.
The main screen appears.