HP MPX200 Multifunction Router - Manual (Page 93)

3–Viewing Router Information
Discovered FC Initiators
ISR654602-00 H 3-37
Discovered FC Initiators
Selecting the Discovered FC Initiators branch on the router tree does not provide
any information in the right pane. Select a specific discovered Fibre Channel
initiator node in the router tree to view the following pages in the right pane:
 “Information” on page 3-37
 “LUN List” on page 3-38
Information
The Information page for a discovered Fibre Channel initiator contains the initiator
information shown in
Figure 3-19 .
Figure 3-19. Discovered FC Initiators: Information Page
 Node Name identifies the initiator’s world wide node name (WWNN).
 Port Name identifies the initiator’s world wide port name (WWPN).
 Port ID identifies the fabric port ID.
 OS Type Selection provides options to select the operating system (OS)
type for the discovered initiator. The iSR6200 router blade uses the OS type
to enable OS-specific commands. Type options include: Other, MS
Windows 2003, Linux, HPUX, Mac, Solaris, VMware, OpenVMS,
Windows 2008, and Windows 2012.
 Status is the activity status for the selected initiator (for example, Logged In
or Logged Out).
If you change the OS Type Selection value, click Save to preserve this setting.