HP MPX200 Multifunction Router - Manual (Page 164)

B–Log Messages
B-4 ISR654602-00 H
41268 QLIS_LoginPduContinue: Missing target
name App Error iSCSI Login PDU received without a target name for
a normal session.
41270 QLIS_LoginPduContinue: TSIH is 0 but Ini-
tiatorName key/value not provided App Error iSCSI Login PDU received without an initiator name
key/value.
41272 QLIS_LoginPduContinue:
CONN_STATE_IN_LOGIN, Unknown InitTaskTag App Error iSCSI Login PDU received with an incorrect initiator
task tag for a session that is partially logged in. This
error occurs if a login PDU other than the initial login
PDU used an initiator task tag that was different from
the initiator task tag provided in the initial login PDU.
41283 QLIS_LoginPduContinue: TSIH 0x%x out of
range App Error iSCSI Login PDU was received with a target session
identifying handle (TSIH) out of range. This error
occurs if the iSCSI initiator attempting the login failed
to used the TSIH value provided in the Target Login
Response PDU (router is target) in subsequent login
PDUs.
41284 QLIS_LoginPduContinue: Session does not
exist, invalid TSIH 0x%x App Error iSCSI Login PDU was received with an invalid TSIH
value. The TSIH is invalid because there is no ses-
sion with that TSIH value. This would occur if the
iSCSI initiator attempting the login failed to used the
TSIH value provided in the target login response
PDU (router is target) in subsequent login PDUs.
41353 QLIS_LoginPduContinue: Session does not
exist, invalid TSIH 0x%x App Error iSCSI Login PDU rejected due to a CHAP authentica-
tion error.
41354 QLIS_LoginPduContinue: Unexpected CHAP
key detected App Error iSCSI Login PDU rejected due to a CHAP key error.
Table B-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description