HP MPX200 Multifunction Router - Manual (Page 194)

B–Log Messages
B-34 ISR654602-00 H
206089 QL3xxx:ql3xxx_probe: cannot register net-
work device %s NIC Error The Ethernet port was not able to register as a net-
work device, resulting in a port initialization error for
the specified network device.
206114 QL3xxx:eth%d: TCP/IP checksum error -
TotalChecksumErrorCount = %lu N IC Error The total number of TCP checksum errors detected
on the Ethernet link belonging to the eth#%d port.
217856 QL3xxx:%s: PHY Downshift occurred NIC Info Ethernet port is operating at 100Mbps speed.
217857 QL3xxx:%s: Link Up NIC Info Ethernet link is up.
217858 QL3xxx:%s: Link Down NIC Info Ethernet link is down.
218389 QL3xxx:%s Adapter Down NIC Info Ethernet port is down.
218401 QL3xxx:%s Adapter Up NIC Info Ethernet port is up.
233473 "memory monitor: Detected Uncorrectable
Ecc %08lx system is rebooting in 5 secs\n" System Fatal Uncorrectable memory error detected at address pro-
vided in log message.
233474 "Failed to register interrupt handler!\n" System Fatal Attempt to register the interrupt handler failed.
233475 "%s class_simple_create failed\n" System Fatal Failed class_simple_create system call from
memory monitor initialization routine.
237572 "Failed to kill sys killer %d\n" System Error Failed to kill system task.
237573 Temperature over high threshold %d System Error Router temperature has exceeded the high tempera-
ture threshold.
249862 Temperature is back to normal range %d System Info Router temperature has returned to the normal oper-
ating range.
Table B-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description