HP MPX200 Multifunction Router User Manual
Page 166

B–Log Messages
B-6
ISR654602-00 H
41717
QLBI_Passthru: Invalid data length %d
bytes
App
Error
Pass-Through command issued by management tool
(such as GUI) was interrupted or timed out.
41750
QLBI_Ioctl: ERROR: Operation (0x%x) not
supported in this mode
App
Error
IOCTL operation unsupported. Operation code pro-
vided in log message.
41768
QLBI_GetLunList: REPORT LUNS command
failed
App
Error
Report LUNs command failed. The Report LUNs
command was issued by the router as part of its dis-
covery process.
41769
QLBI_GetLunList: REPORT LUNS command
failed with CHECK CONDITION, SCSI STATUS
0x%02X
App
Error
Report LUNs command failed with check condition
status. The Report LUNs command was issued by
the router as part of its discovery process.
41771
QLBI_GetLunList: Lun allocation failed
for LunId %d
App
Error
Failed to allocate LUN object; out of resources.
41994
QLFC_Login: VpIndex (%d) out of range
App
Error
Login attempted using Fibre Channel virtual port (VP)
index that is out-of-range (range = 0–31). Index
reported in log message.
41995
QLFC_Login: VP Index 0x%x not configured
App
Error
Login attempted using Fibre Channel VP index that
has not been configured. Operation attempted on an
unconfigured VP.
42002
QLFC_Login: Can't open connection
App
Error
Attempting login but Fibre Channel connection can-
not be opened.
42024
QLFC_Logout: No active path to device.
WWPN:
%.2X%.2X%.2X%.2X%.2X%.2X%.2X%.2X
App
Error
Attempting logout of device for which there is no
active path (WWPN not found).
Table B-1. iSR6200 Router Log Messages (Continued)
ID
Log Message
Module
Type
Msg.
Type
Description