HP MPX200 Multifunction Router - Manual (Page 87)

3–Viewing Router Information
iSCSI Ports
ISR654602-00 H 3-31
 VLAN indicates the virtual LAN configuration: Disabled or Enabled.
Enable VLAN to configure the following:
 VLAN ID specifies an identification value in the range 1 to 4094.
 Priority defines the priority (0 to 7) assigned to this VLAN.
 IPv6 Address. When using an IPv6 address, define the following
parameters:
 IPv6 Address1 is the first user-assigned IPv6 address to which the
port responds. A value of :: indicates that an IPv6 address has not
been assigned.
 IPv6 Address2 is the second user-assigned IPv6 address to which the
port responds. A value of :: indicates that an IPv6 address has not
been assigned.
 IPv6 Default Router sets the default router for the IPv6. The system
can also dynamically set the IPv6 default router, depending on your
network configuration.
 IPv6 Link Local specifies the IPv6 link local address of the port. It
cannot be changed.
 VLAN IPv6 indicates the VLAN IPv6 configuration as Disabled or
Enabled. When enabled, you can configure the following:
 VLAN ID IPv6 contains an identification value in the range 1 to
4094.
 Priority IPv6 defines the priority assigned to this VLAN IPv6. To
set the priority, select a value (between 0 and 7).
NOTE
IPv6 support is available only with hardware version 6 and software
version 2.4.0.0 and greater.