HP MPX200 Multifunction Router - Manual (Page 76)

3–Viewing Router Information
Remote Peers
3-20 ISR654602-00 H
Telnet
The Telnet page contains a Telnet session window to the connected router blade.
Use Telnet on the LAN connection to access a command line interface (CLI) on a
remote machine.
Figure 3-9 shows an example.
Figure 3-9. Blade: Telnet Page
The Telnet page provides the following options:
 Click Reconnect to reopen a disconnected Telnet session.
 Click Disconnect to close the current Telnet session.
Remote Peers
Use remote peers to create a connection between a local and a remote router
using the iSR6200’s iSCSI port. This feature uses the native IP method for
accessing remote iSR6200 information on the local iSR6200. Use a remote peer
when the destination array is located at a different geographic location from the
source array.