HP MPX200 Multifunction Router - Manual (Page 79)

3–Viewing Router Information
FC Ports
ISR654602-00 H 3-23
Information
The Information page for the selected Fibre Channel port contains details about
the port, as shown in
Figure 3-11 .
Figure 3-11. FC Port: Information Page
The Fibre Channel port Information page includes the following Port Information
details:
 Node Name is the world wide node name (WWNN) assigned to the FC port.
 Port Name is the world wide port name (WWPN) assigned to the FC port.
 Port Status lets you set the port status to Enabled or Disabled.
 Link Status indicates the port status as either Link Up or Link Down.
 Port ID indicates the ID assigned by the Fibre Channel fabric or AL_PA
when connected on a private loop.
 Actual Connection Mode specifies the port's connection mode,
Point-to-Point or Loop.
 Actual Data Rate specifies the rate at which the port operates when on-line,
either 2 Gbps, 4 Gbps, or 8 Gbps (gigabits per second).