HP MPX200 Multifunction Router User Manual
Page 180
B–Log Messages
B-20
ISR654602-00 H
106851
#%d: QLTimer: Heartbeat failed
FC
Error
Fibre Channel controller failed to provide a heartbeat.
106853
#%d: QLTimer: Link error count (0x%x)
exceeded, link down
FC
Error
Driver has determined that the Fibre Channel link is
unreliable and unusable due to the number of errors
encountered. The link has been taken down.
106912
#%d: QLReserveLoopId: out of loop Ids
FC
Error
Fibre Channel processor was unable to obtain the
number of loop IDs required. This failure occurs only
when the Fibre Channel processor is running multi-ID
firmware.
106928
#%d: QLMarkDeviceOffline: Device Id: %x
marked offline, cLinkDownTimeout = %x,
cPortDownRetryCount=%x
FC
Error
Driver was unable to re-establish connection to the
target within the time-out and retry counts, and is
therefore marking it offline.
106948
#%d: QLSnsGetAllNext: Name server login
FAILED %x
FC
Error
Fibre Channel processor is unable to log into the
Fibre Channel fabric name server.
107029
#%d: QLUpdateDeviceData: out of slots in
host database
FC
Error
Driver’s host (initiator) database is full.
107030
#%d: QLUpdateDeviceData: out of slots in
target database
FC
Error
Driver’s target database is full.
107041
#%d: QLUpdateDeviceDatabase 0x%x: GET_ID
failed %x
FC
Error
Driver’s host (initiator) database is full. Maximum
host database is 64.
107056
#%d: QLUpdateDeviceDatabase 0x%x: out of
slots in host database
FC
Error
Drivers host (initiator) database is full.
Table B-1. iSR6200 Router Log Messages (Continued)
ID
Log Message
Module
Type
Msg.
Type
Description