HP MPX200 Multifunction Router User Manual
Page 193
![background image](/manuals/398699/193/background.png)
B–Log Messages
ISR654602-00 H
B-33
172303
FcipRoute#%d: TCP Link Down, MAC Stats:
Tx Dropped Count=%ld Rx Dropped Count=%ld
Tx Pause Count=%ld Rx Pause Count=%ld
FCIP
Error
The TCP link for FCIP route #n has disconnected.
The MAC or Ethernet statistics include total packet
dropped during transmit (TxDropped), total packet
dropped during receive (RxDropped), total Ethernet
pause frames transmitted (TxPause), and total Ether-
net pause frames received (RxPause).
172304
FcipRoute#%d: Tcp Retranmissions in last
10 Sec %d, OutStanding Completions %d FC
Frames
FCIP
Error
The total number of TCP retransmissions that hap-
pened in the last 10 seconds before the link was
brought down due to a keepalive time-out. It also dis-
plays the total number of outstanding transmissions
that were pending to be transmitted through the GbE
port.
172322
FcipRoute#%d: FC link on the remote peer
went down
FCIP
Error
The FCIP route #n went down because the Fibre
Channel port on the remote peer went down.
184515
FcipRoute#%d: TCP Link Up
FCIP
Info
TCP link for FCIP route #n has been established.
184536
FcipRoute#%d: FCIP Link Up
FCIP
Info
FCIP link is up for FCIP route #n.
184542
FcipRoute#%d: VLAN Info Unavailable
FCIP
Error
FCIP route #n: Incorrect VLAN configuration.
205571
QL3xxx:%s: Auto Negotiation error
detected
NIC
Error
Ethernet port was not able to negotiate the config-
ured speed.
205572
QL3xxx:eth%d: Unsupported speed portCon-
fig 0x%x
NIC
Error
Ethernet port speed is not supported.
206080
QL3xxx:ql3xxx_probe: cannot allocate eth-
ernet device %s
NIC
Error
Ethernet device could not be configured.
Table B-1. iSR6200 Router Log Messages (Continued)
ID
Log Message
Module
Type
Msg.
Type
Description