HP MPX200 Multifunction Router - Manual (Page 31)

1–Getting Started
Setting Security
ISR654602-00 H 1-11
 Save the router blade’s configuration and persistent data as a FRU to a TGZ
file
 Restore the router blade’s configuration and persistent data from an existing
file
To set the access password:
1. In the router tree, select the router blade for which you want to set the
access password.
2. Click the Information tab.
3. On the Information page’s set of vertical tabs on the left, click the lock icon.
The Security page opens, and shows the host name at the top. Figure 1-4
shows an example.
Figure 1-4. Setting System Security
NOTE
The default SANsurfer Router Manager access password is config. To
ensure router security, change this password after installation.