HP MPX200 Multifunction Router User Manual
Page 177

B–Log Messages
ISR654602-00 H
B-17
86349
#%d: QLEnable: Restart RISC to update
EEPROM
iSCSI
Info
EEPROM updated, restart iSCSI processor (RISC).
86874
#%d: QLIsrDecodeMailbox: Link up
iSCSI
Info
Link up reported by iSCSI processor for GE1 or GE2.
87346
#%d: QLGetFwStateCallback: link 100Mb FDX
iSCSI
Info
iSCSI controller reported a link speed/configuration
of 100Mb full-duplex (FDX).
87348
#%d: QLGetFwStateCallback: link 1000Mb
FDX
iSCSI
Info
iSCSI controller reported a link speed/configuration
of 1000Mb FDX.
87350
#%d: QLGetFwStateCallback: Invalid link
speed 0x%x
iSCSI
Info
iSCSI controller reported an invalid link speed.
102419
#%d: qlutm_init: Diagnostic failed, port 1
invalid SRAM
FC
Fatal
FC1 processor SRAM test failed.
102420
#%d: qlutm_init: Diagnostic failed, port 1
POST failed
FC
Fatal
FC1 processor power-on self-test (POST) failed.
102421
#%d: qlutm_init: Diagnostic failed, port 2
invalid SRAM
FC
Fatal
FC2 processor SRAM test failed.
102422
#%d: qlutm_init: Diagnostic failed, port 2
POST failed
FC
Fatal
FC2 processor POST failed.
102423
#%d: qlutm_init: Failed to return diagnos-
tic result to Bridge
FC
Fatal
Fibre Channel processor failed to return diagnostic
results.
102656
#%d: QLInitializeAdapter: Reset ISP
failed
FC
Fatal
Fibre Channel processor failed reset.
Table B-1. iSR6200 Router Log Messages (Continued)
ID
Log Message
Module
Type
Msg.
Type
Description