HP MPX200 Multifunction Router - Manual (Page 132)

4–Viewing Service Information
Data Migration Jobs
4-4 ISR654602-00 H
 Select the Job Auto-failover Enable check box to cause the job to
automatically fail over to the peer blade if the source or destination
LUN is unavailable on the owner blade. If auto failover is disabled, you
must manually change the ownership of the job to the peer blade.
 If you make any changes to the Migration Parameters, click Set to
save those changes.
Data Migration Jobs
When you click a data migration job in the services tree, information for that job
appears in the right pane. Details for data migration jobs are shown on the
following pages:
 “Active Data Migration Jobs” on page 4-4
 “Synchronizing Jobs” on page 4-5
 “Completed Data Migration Jobs” on page 4-5
Active Data Migration Jobs
The Active Data Migration Jobs page provides data for the currently running data
migration jobs, as shown in
Figure 4-2 .
Figure 4-2. Data Migration Jobs: Active Data Migration Jobs Page
The Active Data Migration Jobs page contains the following information:
 Group Name shows the migration group name for which the migration,
compare, or scrubbing job is scheduled.
 Job ID identifies by number the scheduled migration, compare, or scrubbing
job.
 Job Name identifies by name the scheduled migration, compare, or
scrubbing job.
 Type shows the job type, either Offline, Migration, Compare, or
Scrubbing.
 Status shows the job state, either Running, Paused, Stopped, or Failed.
 % Completed shows the percent of the job that is finished.
 Job ETC indicates the expected time of job completion.