HP Library and Tape Tools - Manual (Page 32)

For tests that can be terminated, the Start Test button changes to Abort Test as shown in Figure 16
(page 32) .
Figure 16 Aborting Test button
Click Abort Test. The L&TT will attempt to abort the test, which can take 10 – 20 seconds or more.
Once the Abort button is clicked, the button is greyed out and cannot be clicked again.
NOTE:
•
If multiple drives are selected, the tests will run in parallel.
•
Some tests can take several minutes to stop after they are aborted.
Using the utility screen
L&TT provides several basic utilities to perform functions on a storage device or media in the device.
To access the utilities screen, select the device you want to test in the device list and click Utility
on the main toolbar as shown in
Figure 17 (page 33) .
32 Using L&TT on Windows