HP Library and Tape Tools - Manual (Page 125)

•
Enter Maximum emailsize — This option lets you specify a maximum size (in megabytes)
for support tickets. If the support ticket exceeds this size, it will be broken up into smaller
subtickets.
•
Check for updates on web — This option is only available for Windows, Linux, and
HP-UX. When this option is enabled, L&TT uses an available Internet connection to look for
product updates, such as firmware upgrades, new device analysis rules, and new version of
L&TT. The software performs this check once every 24 hours. This functionality is only available
if you have an Internet connection. For more information, see
“Using the Internet update
furnctionality” (page 126) .
Windows only
•
Show Scan Details —Enabling this option causes L&TT to show the SCSI bus scanning
process in the device list screen when the program is first started. This option is disabled by
default.
•
Show Instructions (Windows only)—Enabling this option causes L&TT to display
instructions in the device list screen. These instructions provide information corresponding to
the function displayed in the Main screen. More experienced users may want to disable this
option.
•
Display initial dialog at startup (Windows only) — Enabling this option causes
the L&TT Startup screen to be displayed when the program is started. From the Startup screen,
you can select the I/O mode and other options.
•
Check for updates on Web (Windows only) — When this option is enabled, L&TT uses
an available Internet connection to look for product updates such as firmware upgrades, new
device analysis rules, and new versions of L&TT. The software performs this check once every
24 hours. This functionality is only available if you have an Internet connection. For more
information, see
“Using the Internet update furnctionality” (page 126) .
•
Display dialogs for I/Os pending more than 2 minutes (Windows only) —
When this option is enabled, L&TT displays a status update dialog box during long SCSI
operations.
CSI only
•
Current password entered (CSI only) — This option lets you enter the factory password.
The currently entered password is displayed to the right of the option. If no password has
been entered, Not Set is displayed.
•
Real Time Decoding (CSI only) — (Historical logs timestamp in realtime) Use this option
if you want the historical logs timestamp to be in realtime, by default, the timestamp is in
power on time.
•
Enter the proxy server name, to enable the webdownload tool. (CSI only)
— Used to specify the proxy server a LAN uses to connect to the Internet. If you are not sure
how your LAN connects to the Internet, contact your system administrator.
•
Enter the port number for the proxy (CSI only) — Used to specify the port that
the proxy server uses to connect to the Internet. If you are not sure how your LAN connects to
the Internet, contact your system administrator.
Setting software preferences 125