HP Library and Tape Tools - Manual (Page 30)

5. If any options are available for the selected test, the Options button is enabled. Click Options
button to review and set the desired options. When you click an option the description of the
option is shown. To return all of the options to their default values, click Defaults.
6. Click Start Test button to start the test.
Viewing results
When the test or utility is complete, L&TT shows preliminary results of the test. When you click OK
in the dialog, the test results are displayed in the Test/Utility Results tab. The Test/Utility box shows
the results of the test. A more detailed test operation log is displayed in the bottom section of the
screen. Click the “+” or “–” signs to expand or collapse a section of the report. Select an option
in Current Detail Level to display more or less information in the Test Operation Log.
Figure 14 Test/Utility results
To email the results to a support provider, click Email Results as shown in Figure 14 (page 30) .
Fill in the information fields in the Email Test Results dialog and click Send.
30 Using L&TT on Windows