HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 99)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 99
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
W
AN A
CC
EL
E
R
A
T
O
R
To set up remote
logging 1. Click the Setup tab to display the Setup menu.
2. Click Logging to expand the Logging menu.
3. Click Remote Log Servers to display the Logging - Remote Log Servers page.
Figure 2-39. Logging - Remote Log Servers Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Setting the Date and Time
This section describes how to set the date and time, and Network Time Protocol (NTP)
servers for the HP EFS WAN Accelerator. It contains the following topics:
‹ “Setting the Date and Time,” next
‹ “Setting NTP Servers” on page 101
Control Description
Add Remote Syslog Server Server IP. Type the IP address for the server on which to maintain the syslog.
Minimum Severity. Select a severity level from the drop-down list.
Add Server. Click Add Server to add the remote server to the Remote Syslog Server
list.
Remove Selected Servers. To remove a server from the Remote Syslog Server list, click
the check box next to the entry and click Remove Selected Servers.