Modifying web settings – HP StorageWorks Enterprise File Services WAN Accelerator User Manual
Page 110

110
2 C
ONFIGURING
THE
HP EFS WAN A
CCELERATOR
4. Use the controls to complete the configuration, as described in the following table.
5. Optionally, use the Global Settings controls to set global configuration parameters
for any new servers you add to the Server list.
NOTE: If you add a new server to your network and you do not specify these fields at that time,
the global settings are applied automatically.
6. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Modifying Web
Settings
You can modify Management Console Web user interface settings in the
Authentication: Web Settings page.
Control
Description
Add New
TACACS+
Server
Server IP. Type the server IP address in the text box.
Authentication Port. Type the port for the server in the text box.
Authentication Type. Select ASCII or PAP from the drop-down list.
Server Key. Type the server key in the text box.
Timeout. Type the time-out period in the text box.
Retries. Type the number of times you want to allow the user to retry authentication in
the text box. Valid values are 0-5.
Enabled. Select True to enable; select False to disable.
Add Server. Click Add Server to add the
TACACS+
server to the list.
Enable
To enable a
TACACS+
server that has been added to the list, click the check box and
click Enable.
Disable
To disable a
TACACS+
server that has been added to the list, click the check box and
click Disable.
Remove Selected Servers
To remove an
TACACS+
server from the list, click the check box next to the entry and
click Remove Selected Servers.
Control
Description
Global Settings
Server Key. Type the server key in the text box.
Timeout. Type the time-out period in the text box.
Retries. Type the number of times you want to allow the user to retry authentication in
the text box.
Update Settings. Click Update Settings to update your global
TACACS+
settings.