HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 118)

118 2 C ONFIGURING THE HP EFS WAN A CCELERATOR
To upgrade or revert
software versions 1. Click the Setup tab to display the Setup menu.
2. Click Upgrade Software to display the Software Upgrade page.
Figure 2-52. Software Upgrade Page
3. Use the controls to complete the desired process, as described in the following
table.
IMPORTANT: You must restart the HP EFS WAN Accelerator service for this configuration
to take effect. For detailed information, see
“Starting and Stopping Services” on page 119 .
Control Description
Install Software Install from a URL. Select this button and type the URL in the text box to install the
software from a URL.
If you specify a URL in the URL text box, the image is uploaded, installed, and the
appliance is rebooted at the time you specify.
Install From Local File. Select this button and type the path to install from a file on a
Web browser machine. (To browse to the local file directory, click Browse.)
If you specify a file to upload in the Local File text box, the image is uploaded
immediately, however the image is installed and the appliance is rebooted at the time you
specify.
Install Image. Click Install Image to install the new version of the software.
Schedule Upgrade for Later. Check this box to schedule the upgrade process.
Date. Type the date to run the operation, following the format YYYY/MM/DD.
Time. Type the time to run the operation, following the format HH:MM:SS.
Switch to Backup Version To revert to the previous software version (identified on this page), click Switch to
Backup Version. The process starts immediately.