Navigating in the management console – HP StorageWorks Enterprise File Services WAN Accelerator User Manual
Page 16
16
1 O
VERVIEW
OF
THE
HP EFS WAN A
CCELERATOR
M
ANAGEMENT
C
ONSOLE
The following table describes the information included in the Home: Welcome page.
Navigating in the Management Console
The following section describes how to navigate in the Management Console.
Navigating in
the
Management
Console
You navigate to the tools and reports available to you in the Management Console
using hyperlinked tabs and menus.
Field
Description
Status Bar
The status bar appears on every page of the Management Console and displays the current
status of the system. To check the status of the system, click the link in the status bar. For
detailed information about system alarms, see
“Viewing Alarm Status Reports” on
. The HP EFS WAN Accelerator can be in one of the following states:
• Healthy. All systems are functioning properly.
• Degraded. A system alarm has been triggered. Alarms are triggered for software
version mismatches, abnormal memory page swapping activity, when the CPU
utilization threshold has been reached, or on the models DL380-3010 and DL380-5010,
if there is a Redundant Array of Independent Disks (RAID) issue.
• Critical. Critical indicates one of the following states:
– Bypass Mode. The HP EFS WAN Accelerator service is not functioning or the HP
EFS WAN Accelerator is in bypass mode.
– Unlicensed. The HP EFS WAN Accelerator does not have a a base license key or
the key has expired.
– Corrupted Store. The HP EFS WAN Accelerator data store is corrupt.
– Service Halted. The HP EFS WAN Accelerator has detected a software error that
prevents the HP EFS WAN Accelerator service from continuing.
• Connection Limit. The system has reached the maximum number of connections for
this model of the HP EFS WAN Accelerator.
TIP: The status bar alerts you if you need to save your configuration changes to memory.
To save your changes, click the link in the status bar.
System Up
Time
Total time the system has been active.
Service Up
Time
The state of the HP EFS WAN Accelerator service. The total time the HP EFS WAN
Accelerator has been running or Not Running is displayed. To restart the HP EFS WAN
Accelerator service, see
“Starting and Stopping Services” on page 119
.
Temperature
The current Central Processing Unit (CPU) temperature. An alarm is raised if the
temperature rises above 50º C or falls below 0º C.