Configuring mapi protocol options – HP StorageWorks Enterprise File Services WAN Accelerator User Manual
Page 32

32
2 C
ONFIGURING
THE
HP EFS WAN A
CCELERATOR
Configuring
MAPI Protocol
Options
You configure MAPI protocol support in the Optimization Service - Protocol: MAPI
Page.
You configure MAPI support only if you plan to optimize MAPI traffic.
Optimizing MAPI
Exchange in Out-
of-Path
Deployments
In out-of-path deployments, if you want to optimize MAPI Exchange by destination
port. You must define a fixed-target, in-path rules that specify the following ports on
the client-side appliance:
Port 135. The Microsoft end-point mapper port
Port 7830. The HP EFS WAN Accelerator port used for Exchange traffic
Port 7840. The HP EFS WAN Accelerator port used for Exchange Directory
NSPI traffic
For detailed information about defining in-path rules, see
NOTE: If you changed the Microsoft Exchange Information Store Interface (MEISI) port in
your environment, in the Advanced Networking - Protocol MAPI page on the client-side
appliance, change port 7830 to the static port number you have configured in your Exchange
environment. For further information about changing (MEISI) ports, see the Microsoft
Exchange Information Store Interface at
http://support.microsoft.com/default.aspx?scid=kb;en-us;270836.