Refreshing, Refreshing configuration, Information manually for each information source – HP XP P9000 Command View Advanced Edition Software User Manual
Page 265: Source
To refresh configuration information automatically:
1.
From the Explorer menu, choose Settings and then Refresh Setting.
The Refresh Setting subwindow appears.
2.
Click the Configuration Setting link.
The Configuration Setting subwindow appears.
3.
Click the
icon of the information source where you want to acquire configuration information
automatically.
The Edit Interval of Refresh Configuration - information-source-name dialog box appears.
4.
Set and apply a refresh interval and refresh start time.
The settings in the Configuration Setting subwindow are applied. From this point, configuration
information is automatically refreshed based on the applied refresh settings.
Refreshing configuration information manually for each information source
To refresh configuration information manually for each information source:
1.
From the Explorer menu, choose Settings and then Refresh Setting.
The Refresh Setting subwindow appears.
2.
Click the Configuration Setting link.
The Configuration Setting subwindow appears.
NOTE:
Only remote instances of Device Manager are displayed. The local instance of Device
Manager is refreshed automatically.
3.
Select the check boxes of the information sources where you want to acquire the latest
configuration information, and then click Refresh Configuration.
The Refresh Configuration - information-source-name dialog box appears.
4.
Check the message and then perform the refresh.
When processing finishes, a dialog box appears indicating that configuration information is
acquired.
5.
In the Configuration Setting subwindow, confirm that the Last Refresh time is updated.
Related topics
• About refreshing configuration information
• Refreshing configuration information manually for each storage system
• Refreshing configuration information automatically (using the refresh settings)
Refreshing configuration information manually for each storage system
To refresh configuration information manually on a storage system basis:
1.
From the Explorer menu, choose Resources and then Storage Systems.
The Storage Systems subwindow appears.
User Guide
265