HP XP P9000 Command View Advanced Edition Software User Manual
Page 132
Setting monitoring conditions for copy license usage
To set monitoring conditions for copy license usage:
1.
If you intend to use SNMP traps to send alerts, load the MIB definition files into the software that
will receive the traps.
For the location of the Replication Manager MIB definition files, see “
2.
From the Explorer menu, select Resources, and then Storage Systems.
The Storage Systems subwindow appears.
3.
Expand the object tree, and then select a storage system under Storage Systems.
The summary information for the selected storage system is displayed.
4.
Click the Open link.
The Open subwindow appears.
5.
Under the Copy Licenses tab, select the check boxes of the copy types where you want to set
monitoring conditions, and then click Create Alerts.
The Create Alert Setting Wizard starts with the 1. Introduction page displayed. If you select the
Don’t show this message again check box, this page is not displayed in the future.
6.
Read the wizard page, and then click Next.
The 2. Select Monitoring Type page appears.
7.
Select the Copy License Usage Monitoring option, and then click Next.
The 3. Select Alert Setting page appears.
8.
Select the Create New Alert Setting option, and then click Next.
The 4. Edit Alert Action page appears.
9.
Specify the alert monitoring conditions and notification method.
You can also save these settings as a template or select an existing template to apply to them.
10.
Click Next.
The 5. Confirm page appears.
11.
Confirm the settings to be applied, and then click Confirm.
The 6. Finish page appears.
12.
Click Finish.
The settings specified in the wizard are registered in the list of alert settings. To view this list,
from the Explorer menu, select Alerts, and then Alerts.
Related topics
Customizing monitoring parameters
132