HP Remote Assistant Card - Manual (Page 78)

3 Server Software Installation and Configuration
60
Server Installation Overview
HP NetServers in a remote management system require access to a HP NetServer
Navigator Utility Partition, or to 8 MB of disk space available in a bootable DOS
partition installed on the hard disk. Also check to be sure you have 200 KB
(maximum) of disk space available on the NOS partition for agents and drivers. And
if you plan to install pcANYWHERE32 (Windows NT 3.51 graphics console
redirection software), you'll need at least 16 MB of free disk space.
Using Pager Services
HP Remote Assistant supports most popular paging services. Before you set up HP
Remote Assistant, contact a paging service and arrange for the number of pagers (up
to eight per Remote Assistant installation) that you require. To use the alphanumeric
paging capabilities now featured in the HP Remote Assistant, make sure that the
service you select supports Telocator Alphanumeric Protocol (TAP).