HP Remote Assistant Card - Manual (Page 159)

C Modem Commands
141
Digit
(Terse)
Words (Verbose) Effect
11 CONNECT 4800 Modem has detected carrier at 4800 bps and gone on-line.
12 CONNECT 9600 Modem has detected carrier at 9600 bps and gone on-line.
13 CONNECT 14400 Modem has detected carrier at 14400 bps and gone on-line.
Note: If modem is used in Reliable mode, the following responses change:
1R CONNECT RELIABLE as above, except Reliable
5R CONNECT 1200 RELIABLE as above, except Reliable
9R CONNECT 2400 RELIABLE as above, except Reliable
1R CONNECT 4800 RELIABLE as above, except Reliable
2R CONNECT 9600 RELIABLE as above, except Reliable
3R CONNECT 14400 RELIABLE as above, except Reliable
Note: If modem is used in LAP-M Reliable Mode, the following responses change:
1L CONNECT LAPM as above, except Reliable
5L CONNECT 1200 LAPM as above, except Reliable
9L CONNECT 2400 LAPM as above, except Reliable
0L CONNECT 4800 LAPM as above, except Reliable
2L CONNECT 9600 LAPM as above, except Reliable
3L CONNECT 14400 LAPM as above, except Reliable
Note: If the Standard AT Command Set 2400 responses are selected with the &Q command, the
following responses change:
9 (not used)
10 CONNECT 2400 Modem has detected carrier at 2400 bps and gone on-line.