HP Remote Assistant Card - Manual (Page 66)

2 Hardware Installation and Configuration
48
Editing Administrator Aliases
If this is the first time you are configuring administrator information, the
Administrator window is empty. Add aliases by selecting a desired record and pressing
Enter. (If you are using a mouse, you can also double-click a record in the window.)
When a record is chosen, the Edit Administrator window appears, providing fields for
entering and modifying administrator data.
NOTE Pager # refers to the phone number of your paging service provider.
If you selected an empty record for editing, the fields are blank. If you selected the
record for an existing user, the fields will contain the current user data.
Entering a Dial-back Number
Enter a dial-back number to allow HP Remote Assistant to call back to the remote
console. Dial back reduces communication costs at the remote site and is
recommended for security reasons; an unauthorized user will probably not have access
to the dial-back number.
Adding Pager Numbers
In the Pager # field, enter a string of digits for the pager telephone number, followed
by a series of commas to insert pauses (a comma represents a two-second pause) that
allow the pager service time to answer the phone. A typical string consists of the pager
telephone number followed by three or four commas providing a six- to eight-second
delay. If the modem must wait for a secondary dial tone, type "w" between the prefix
and the pager number. This character instructs the modem to wait before continuing
the dial.