HP NonStop G-Series - Manual (Page 252)

before you can proceed.
customer-replaceable unit (CRU)
A server component that can be removed and installed by customers with minimal
training. CRUs are considered to be a subset of
field-replaceable units (FRUs) .
D
darksite
A location where no operator is working on site and the only access to the LAN is from a
centralized monitoring station through a modem connected to a routing workstation.
Darksite is a synonym for unattended site.
details pane
Located in the lower portion of the Management window , the details pane contains
specific information about the resource selected in the tree pane. Click the corresponding
tab in the details pane to select the type of information you want.
See also view pane and tree pane
dial-in
See remote access .
dial-out
See remote access .
dial-out point
An OSM workstation from which incident reports are sent to a remote service provider .
Incident reports are sent from the OSM workstations defined as the primary and backup
dial-out points (the primary and backup system consoles.
Note: Remote access and remote notification are not available in countries where
the modem provided by HP is not certified. In these countries, you cannot use
the OSM software to dial out to or accept dial-in communications from a
service provider.
discovery
The process by which the OSM Service Connection determines the supported resources
that exist on a NonStop S-series server, including
customer-replaceable units (CRUs) ,
field-replaceable units (FRUs) , and their subcomponents; I/O process names; and device
states. I/O process names (or logical names) are available only to the OSM Service
Connection.
See also initial discovery
disk drive