HP NonStop G-Series - Manual (Page 192)

Format Disk format in progress.
Hard Down
The disk volume or disk path was put in this state by an OSM Abort actionor
an SCF ABORT command, or it is physically inaccessible because of a
hardware error. In SCF, the equivalent state is STOPPED, substate
HARDDOWN.
Inaccessible Disk cannot be accessed.
Revival A mirrored disk is being updated.
Special Mount Only maintenance-type I/O operations can be performed on the disk.
Unknown The disk might not be responding.
Up
The disk path is logically accessible. This state is equivalent to the
STARTED state in SCF.
Power State
Powered On Meaning
On Component is powered on.
Off Component is powered off.
Possible Redundant Power Problem
There might be a problem with the backup power supply for
this component. (The Redundant Power Scrub action could not
determine the exact cause of the problem.)
Redundant Power Problem
There is a problem with the backup power supply for this
component (as determined by the Redundant Power Scrub
action).
Unknown Power state of component is unknown.
Processor State
Value Meaning
Dump in Progress
Memory is being dumped from this processor. Submit memory dumps
to the your service provider for problem analysis.
Executing Diagnostics The processor is performing diagnostics.
Frozen
The processor was frozen using the system Freeze action in the TSM
Low-Level Link application.
Frozen by Other Processor
This freeze-enabled processor froze when another processor asserted
system freeze.
Halted The processor is halted.
Hardware Error Freeze The processor has asserted system freeze.
Hung The processor has stopped responding
Offline Diagnostics Running Component is unavailable due to offline diagnostic testing.
Primed For Dump
The processor is primed for memory dump. Submit memory dumps to
your service provider for problem analysis.
Primed For Reload The processor is primed for system load.