Ioam enclosure, Attributes, Actions – HP NonStop G-Series User Manual
Page 122: Ioam fan, Ioam fans
Write LCD Line
Allows you to edit the text displayed by the IOAMs LCD. You can modify lines 9 through 15 with
this action.
IOAM Enclosure
An enclosure that contains two
.
Location in OSM Tree: System > Group > IOAM Enclosure
Example: IOAM Enclosure 13
Attributes
Logical
Rack Name An arbitrary name assigned through the
action.
Rack Offset
the physical location of the enclosure within the rack.
Actions
Replace Enclosure or ServerNet Switch Board
Launches a guided procedure, which provides step-by-step instructions for replacing the entire
IOAM enclosure or an individual ServerNet switch board within the enclosure.
Set Rack Name and Offset
Allows you to assign a rack name and rack offset for the enclosure. Rack name and rack offset are
displayed in the LCD for each IOAM and also as attributes under the enclosure object. Rack name is
arbitrary and can be up to eight characters long. Rack offset allows you to specify the physical
location within the rack.
IOAM Fan
component that circulates air into the enclosure to help maintain optimal temperature.
There are two fans in each IOAM, for a total of four in each IO enclosure.
Note: If a ServerNet switch board is not present, the IOAM fans will not appear in OSM.
For information on how to replace an individual IOAM Fan, see the
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > Fan
Example: Fan (13.2.16)