HP NonStop G-Series - Manual (Page 124)

IOAM Power Supply
Supplies power to the IOAM . There are two IOAM power supply units in each IOAM.
For information on how to replace an individual Power Supply, see the see the CSSI web site .
Note: If a ServerNet switch board is not present, the IOAM power supplies will not appear in
OSM.
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > Power Supply
Example: Power Supply (13.2.15)
Attributes
IOAM Power Supply
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Values
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Type Identifies the model type.
Logical
Device State
The state of the component as known to the NonStop Kernel operating system on the
server.
Values
IOMF (I/O Multifunction) CRU
Each I/O multifunction (IOMF) CRU contains these components:
A service processor (SP) ●
A power supply ●
Three SCSI controllers ●
Location in OSM Tree: System > Group > Module > IOMF