HP NonStop G-Series - Manual (Page 130)

CRU. If initialization fails, an alarm is generated.
This action is triggered automatically when a new CRU is inserted while OSM is running or when an
(SCF) STATUS ADAPTER command is issued. If a CRU is inserted while OSM is not running,
perform this action after logging on to the OSM Service Connection.
Test Verify
Performs basic tests on the CRU. You can perform this action when the CRU is online.
LIF
The logical interface, associated with a physical interface (PIF), used by an ethernet controller port or
a ServerNet adapter port.
Location in OSM Tree:
For an Ethernet controller port LIF: System > Group > Module > PMF2 > MIOE > MIOE SAC >
MIOE PIF > LIF
For a ServerNet adapter port LIF: System > Group > Module > E4SA > E4SA SAC > E4SA PIF >
LIF
Example: LIF $ZZLAN.LANX
Attributes
LIF
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Values
Logical
LIF State
The state of the logical interface.
Values: Started, Stopped, Unavailable
Actions
Abort
Terminates operation of the LIF. When the Abort action finishes, the LIF is in the Stopped state.
Delete
Deletes the LIF.
Start