beautypg.com

Data collection attributes – HP NonStop G-Series User Manual

Page 181

background image

Version

The release version update of the NonStop Kernel operating system that is running on the
server.

Example: G06.19

Other values that might be displayed for Operating System Version are Not Running and
Halted.

System Services

Advanced Storage Configuration State

Indicates whether or not the system has been configured to
allow advanced storage configurations. This feature is
enabled/disabled using the

Enable

and

Disable Advanced

Storage Configuration

actions.

Currently supported advanced storage configurations
include Flexible Disk Configuration (see FDC Support Note
for more information) and

ESS disk

configuration (this

attribute must be enabled before you can configure ESS
disks in SCF).

Values: Enabled, Disabled, Unknown

Data Collection Services

Automatic Data Collection State

Indicates whether automatic data collection for failed system
resources is enabled or disabled. To change this attribute state,
use the Enable or Disable Automatic Data Collection actions.

Diagnostic Data Collection Volume

Indicates the volume in which automatic or manual data
collection will take place. This volume is assigned by using the
Set Data Collection Volume action.

Incident Report Configuration

Problem Incident Report Creation State

Indicates whether or not OSM's ability to create Problem
Incident Reports has been suppressed. This suppression is
accomplished by the

Suppress Problem Incident Report

Creation

action and is desirable to stop dial-out of known

problems, such as those that may occur during CRU
replacements.

Values: Suppressed, Unsuppressed

Reason for Suppression

Why the creation ability was suppressed, displayed as free
form text.

This attribute is shown only if the Problem Incident Report
Creation State value is Suppressed.