HP NonStop G-Series - Manual (Page 223)

Attributes
Switch Logic Board
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or
service is required.
Values
Physical
Part Number The part number of the switch logic board.
Fault LED State
The state of the fault LED on the switch logic board.
Values: On, Off, On and Blinking, Off and Blinking
Track ID The track ID of the switch logic board.
Hardware Revision The hardware revision of the switch logic board.
Logical
Last Reset Type
The reason for last reset operation.
Values:
Hardware initiated
Soft reset button pressed
Front panel button pressed
Second Level Watchdog timer expiration
Third Level Watchdog timer expiration
Firmware initiated
Soft reset command issued
Hard reset command issued
Time of Last Soft Reset The date and time of the last processor soft reset.
Time of Last Hard Reset The date and time of the last processor hard reset.
Fabric Side Values: X or Y
Firmware State
The state of the switch firmware.
Values: Active, Updating, In Test, Initializing, Unknown
Firmware
Version The VPROC of the firmware currently loaded on the switch logic board.
Default File Name The full path name of the default firmware file on the server.
Default File Version The version of the firmware in the default firmware file.