HP NonStop G-Series - Manual (Page 169)

Attributes
Storage Router
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Values
Logical
Router Type
The type of router.
Values: SCSI Extender or SCSI-to-Fiber Converter
Logical Device Number The number assigned to the router by the file system.
Communication State
Whether the resource is communicating to the host system.
Values: Communicating, Not Communicating, Unknown
Product ID
A unique number that identifies the product as a SCSI Extender (2
models) or SCSI-to-Fiber Converter. Otherwise, Unknown is shown.
Device State
The state of the component as known to the NonStop Kernel
operating system (open scsi process) on the server.
Values
Configured Controller
Location
The location of the configured SCSI controller.
Example: PMF.SAC-3.GRP-1.MOD-1.SLOT-55
Physical
Part Number
The part number of the component that was assigned in manufacturing. Use part
numbers for identifying and ordering parts. This is not the spare part number.
Process Pair
Redundancy Status
The fault-tolerance status of the tape environment.
Values: Fully Redundant, Redundancy Lost
Backup Process ID The processor number and PIN of the current backup tape I/O process
Primary Process ID The processor number and PIN of the current primary tape I/O process.
SCSI Interface
SCSI ID
An identification number assigned to the device when configured.
8 SCSI-to-Fiber extender / SCSI to Fiber Converter
9 Fiber-to-SCSI extender