HP XP Array Manager Software User Manual
Page 109
•
cygnus < raid < Cancer < Pisces < RAID < RAID5
Regardless of whether you specify or omit Performance Control group names, the exported CSV
files contain statistics about host bus adapters that do not belong to any Performance Control
groups. The exported CSV files use the heading named Not Grouped to indicate statistics
about these host bus adapters.
If Performance Control-group-name is not specified, the monitoring data of all the Performance
Control groups will be exported.
PPCGWWNU[[Performance Control-group-name]:[Performance Control-group-name]][U…]
Use this operand when you want to export statistics about host bus adapters (WWNs) belonging to
Performance Control groups, which are displayed in the WWN tab of the Auto LUN window. When
statistics are exported in a ZIP file, the file name will be PPCGWWN_dat.ZIP. For details on the
statistics exported by this operand, see
When you specify variables Performance Control-group-name, you can narrow the range
of Performance Control groups whose monitoring data are to be exported. Performance
Control-group-name is the name of a Performance Control group. If the name includes any
non-alphanumeric character, the name must be enclosed by double quotation marks ("). The
colon (:) indicates a range. For example, Grp01:Grp03 indicates a range of Performance
Control groups from Grp01 to Grp03.
Ensure that the Performance Control-group-name value on the left of the colon is smaller than the
Performance Control-group-name value on the right of the colon. Note that numerals are smaller
than letters and lowercase letters are smaller than uppercase letters. In the following formulae,
values are arranged so that smaller values are on the left and larger values are on the right:
•
0 < 1 < 2 < …< 9 < a < b < …< z < A < B < … < Z
•
cygnus < raid < Cancer < Pisces < RAID < RAID5
If Performance Control-group-name is not specified, the monitoring data of all the host bus
adapters will be exported.
RemoteCopy
Use this operand when you want to export statistics about remote copy operations which are
displayed in the Continuous Access Monitor window and the TrueCopy for Mainframe Monitor
window. By using this operand, you can export monitoring data about remote copy operations
performed by Continuous Access and TrueCopy for Mainframe in the whole storage system. When
statistics are exported to a ZIP file, the file name will be RemoteCopy_dat.ZIP. For details on the
statistics exported by this operand, see
on page 82 in “
RCLUU[[port-name.host-group-id]:[port-name.host-group-id]][U…]
Use this operand when you want to export statistics about remote copy operations which are
displayed in the Continuous Access Monitor window and the TrueCopy for Mainframe Monitor
window. By using this operand, you can export monitoring data about remote copy operations
performed by Continuous Access and TrueCopy for Mainframe at each LU path. When statistics
are exported to a ZIP file, the file name will be RCLU_dat.ZIP. For details on the statistics exported
by this operand, see
on page 83 in “
When you specify variables port-name.host-group-id, you can narrow the range of LU paths whose
monitoring data are to be exported. port-name is a port name. host-group-id is the ID of a host
group. The host group ID must be a hexadecimal numeral. The colon (:) indicates a range. For
example, CL1-C.01:CL1-C.03 indicates the range from the host group #01 of the CL1-C
port to the host group #03 of the CL1-C port.
Ensure that the value on the left of the colon is smaller than the value on the right of the colon.
Note that the smallest port-name value is CL1-A and the largest port-name value is CL4-r. The
following formula illustrates which port-name value is smaller than which port-name value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b < … < CL4-a < … < CL4-r
XP24000 Performance Monitor User's Guide
109