HP StorageWorks XP Remote Web Console Software User Manual
Page 90
90
Continuous Access XP Journal
•
Display all JNL groups:
NOTE:
This check box appears only if you are logged onto an XP10000.
If this check box is cleared, the list below the check box only displays journal groups numbered 00 to
0F.
If this check box is selected, the list below the check box displays journal groups numbered 00 to FF.
CAUTION:
You cannot perform the following operations on journal groups numbered 10 to FF:
• Register journal volumes in journal groups (see ”
Registering journal volumes in journal groups
• Delete journal volumes from journal groups (see ”
Deleting journal volumes from journal groups
• Change journal group options (see ”
Changing options for journal groups
• Restore mirrors (see ”
Restoring mirrors (Pairresync: resuming copy operations)
•
Upper-right list: If a master journal or restore journal group is selected in the tree, the upper-right list
displays a list of mirrors. A mirror is a combination of a master journal group and a restore journal
group.
If another journal group is selected in the tree, the upper-list displays information about the selected
journal group.
One row in this list represents one mirror (or one journal group).
• JNLG: Number of a journal group in the local disk array.
• Attribute: Attribute of a journal group in the local disk array.
• Status: Status of a journal group in the local disk array.
Initial
A journal group in initial status.
Journal volumes are registered in this journal group, but no data volumes (primary nor
secondary volumes) are registered in this journal group.
Master
A master journal group.
Journal groups and primary volumes are registered in this journal group.
Restore
A restore journal group.
Journal groups and secondary volumes are registered in this journal group.
Blank
Journal and data volumes are not registered in this journal group.
Initial
A journal group in initial status.
Journal volumes are registered in this journal group, but no data volumes (primary nor
secondary volumes) are registered in this journal group.
When you create a Continuous Access XP Journal volume pair, data volumes are registered in
a journal group. The status of the journal group changes to Active.
Active
Either of the following:
•
Initial copy is in progress. The primary and secondary volumes are not synchronized.
•
Initial copy is finished. The primary and secondary volumes are synchronized.
NOTE:
If a journal group is in Active status, some data volume pairs in the journal group
might be split. If this happens, Warning appears. To restore such data volume pairs, use the
Pair Operation pane. For more information, see ”