HP StorageWorks XP Remote Web Console Software - Manual (Page 117)

Continuous Access XP Journal user guide 117
NOTE: The current version does not support LUSE volumes.
The second line displays the device emulation type.
The third line displays the volume capacity.
NOTE: If a logical volume is an external volume, # appears after the LDEV number. For more
information about external volumes, see the HP StorageWorks External Storage XP User Guide.
• S-VOL: Secondary data volume.
The first line displays the secondary volume’s port number, host group ID, and LUN. If the secondary
data volume exists in the local disk array, the first line also displays the CLPR number and name. If the
secondary data volume is a LUSE volume, the LUN is the LDEV number of the top LDEV (that is, the
smallest LDEV number in the group of LDEVs that are combined as a LUSE volume).
NOTE: The current version does not support LUSE volumes.
The second line displays the device emulation type.
The third line displays the volume capacity.
NOTE: If a logical volume is an external volume, # appears after the LDEV number. For more
information about external volumes, see the HP StorageWorks External Storage XP User Guide.
• CLPR: CLPR number and name of the logical volume in the local disk array.
• M-JNL Group: Master journal group.
• R-JNL Group: Restore journal group.
• Mirror ID: Mirror ID.
• CT Group: Consistency group number.
• DKC S/N (CTRL ID): Secondary disk array’s serial number and controller ID. The controller ID is
enclosed by parentheses.
• Path Type: Channel type of the path interface between the disk arrays (fibre).
NOTE: In the current version, the channel type is always displayed as Fibre.
• Initial Copy Priority: Initial copy operations priority (scheduling order). The value can be within the
range of 1 to 256 (disabled when the status becomes PAIR).
• Error Level: Range used for splitting a pair when a failure occurs.
• Group: If a failure occurs with a pair, all pairs in the consistency group where the pair belongs are
split.
• LU: If a failure occurs with a pair, only the pair is split.
• S-VOL Write: Indicates whether write I/O to the secondary volume is enabled or disabled (enabled
only when the pair is split).
• Other Information: Displays the following:
• Established Time: Date and time when the volume pair was created.
• Updated Time: Date and time when the volume pair status was last updated.
• Refresh the Pair Operation tab after this window is closed: If selected, the Pair Operation pane is
updated when the Pairdisplay pane closes.
• Previous: Displays the pair status information for the previous pair in the list (the pair in the row above).
• Next: Displays the pair status information for the next pair in the list (the pair in the row below).