FUTEK IPM600 (D610) Digital Display - Manual (Page 48)

5.SETTING OF FUNCTIONS
37
5-10. Auto Print
The indicated value is automatically printed to the UNIPULSE printer coupled with the
F371 through the SI/F. A print is made when the indicated value is stable. (Set the
stability parameters by the stability operation.)
When Near Zero is OFF, Indicated value is held until Near Zero turns ON after Stability
turned ON.
(Hold will be released when 1.5 sec. is passed after Near Zero is ON.)
How to set
Operation of the indicated value hold function
Setting call Page 3 Calibration
Indicated Value
Near Zero
0
Stable
Near Zero
ON
ON
ON ON
OFF
OFF
OFF
Autmatic
Hold
1.5Seconds
Time
ON
Hold function
Indicatid Value
SI/F
Compariosn
Sensor input value
Output signal
Printing